Most Popular Product
|Home||» Products||» Sectional Warping||» Sectional Warping|
Product Code : 01
- Warping and beaming is driven by A.C. frequency converter so that constant yarn speed and tension is gained even at high speed.
- The gas-liquid converting pressurized oil braking system with fast-speed and steady braking.
- The guiding of yarn strip is precisely driven by a digital A.C. servo controller so that positioning of the start point and yarn strip is completed automatically by one time button pressing.
- The forward and backward movement of warping table is controlled through AC digital servo controller and transmission of ball screw rod. The system is also equipped with press roller and several kinds of sensors.
- The warping table will be backed for the same distance in the warping procedure.
- The beaming tension of yarn is measured with sensor and controlled by proportional reducing value. The inner and outer tension is set on TTS(touching sensor screen)
- The steel drum with fixed cone is precisely checked on inertial balance.
- Mechatronics and automation is realized with a bus PLCs digital A.C. servo controllers microcomputers with TTS for Warping & Beaming Controls.
- The warping frame is moved on the rail but the lease reed and creel is fixed so that the position of warp stripe is unchanged and side yarn tension also is constant.
- The movable beaming unit is set for one or several warping units. The electrical source and air supply is reliably provided by the special plugs.
- To suit user’s need several types of creels different spindle space and number is offered.
- Several types of tension devices and stop motions are provided.
- Static eliminator is provided in the warping table.
- Working width range available between 2200-3600mm
- Main Domestic Market
- All India